The subtree-accessibility Command-Line Tool

List or update the set of subtree accessibility restrictions defined in the Directory Server.

Usage

subtree-accessibility {arguments}

LDAP Connection and Authentication Arguments

• -h {host} / --hostname {host} — The IP address or resolvable name to use to connect to the directory server. If this is not provided, then a default value of 'localhost' will be used.
  
  
• -p {port} / --port {port} — The port to use to connect to the directory server. If this is not provided, then a default value of 389 will be used.
  The specified value must not be less than 1 or greater than 65,535.
  
  
• -D {dn} / --bindDN {dn} — The DN to use to bind to the directory server when performing simple authentication.
  A provided value must be able to be parsed as an LDAP distinguished name as described in RFC 4514.
  
  
• -w {password} / --bindPassword {password} — The password to use to bind to the directory server when performing simple authentication or a password-based SASL mechanism.
  
  
• -j {path} / --bindPasswordFile {path} — The path to the file containing the password to use to bind to the directory server when performing simple authentication or a password-based SASL mechanism.
  The specified path must refer to a file that exists.
  
  
• --promptForBindPassword — Indicates that the tool should interactively prompt the user for the bind password.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• -Z / --useSSL — Use SSL when communicating with the directory server.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• -q / --useStartTLS — Use StartTLS when communicating with the directory server.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --defaultTrust — Use the JVM's default trust store, and optionally an additional trust store specified using the --trustStorePath argument, to non-interactively determine whether to trust any certificate chain presented during TLS negotiation. If the chain cannot be trusted based on any of those sources, then negotiation will fail without prompting about whether to trust it.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• -X / --trustAll — Trust any certificate presented by the directory server.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• -K {path} / --keyStorePath {path} — The path to the file to use as the key store for obtaining client certificates when communicating securely with the directory server.
  
  
• -W {password} / --keyStorePassword {password} — The password to use to access the key store contents.
  
  
• -u {path} / --keyStorePasswordFile {path} — The path to the file containing the password to use to access the key store contents.
  The specified path must refer to a file that may or may not exist.
  
  
• --promptForKeyStorePassword — Indicates that the tool should interactively prompt the user for the password to use to access the key store contents.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --keyStoreFormat {format} — The format (e.g., JKS, PKCS12, PKCS11, BCFKS, etc.) for the key store file.
  
  
• -P {path} / --trustStorePath {path} — The path to the file to use as trust store when determining whether to trust a certificate presented by the directory server.
  
  
• -T {password} / --trustStorePassword {password} — The password to use to access the trust store contents.
  
  
• -U {path} / --trustStorePasswordFile {path} — The path to the file containing the password to use to access the trust store contents.
  The specified path must refer to a file that may or may not exist.
  
  
• --promptForTrustStorePassword — Indicates that the tool should interactively prompt the user for the password to use to access the trust store contents.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --trustStoreFormat {format} — The format (e.g., JKS, PKCS12, PKCS11, BCFKS, etc.) for the trust store file.
  
  
• --verifyCertificateHostnames — Indicates that the tool should verify that the hostname or IP addressed used to establish connections ot the LDAP server matches an address for which the server's TLS certificate was issued.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• -N {nickname} / --certNickname {nickname} — The nickname (alias) of the client certificate in the key store to present to the directory server for SSL client authentication.
  
  
• --enableSSLDebugging — Enable Java's low-level support for debugging SSL/TLS communication. This is equivalent to setting the 'javax.net.debug' property to 'all'.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• -o {name=value} / --saslOption {name=value} — A name-value pair providing information to use when performing SASL authentication.
  
  
• --useSASLExternal — Use the SASL EXTERNAL mechanism to authenticate.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --helpSASL — Provide information about the supported SASL mechanisms, including the properties available for use with each.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  

Additional Arguments

• -s / --set — Indicates that the set of accessibility restrictions should be updated rather than retrieved.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• -b {dn} / --baseDN {dn} — The base DN of the subtree for which an accessibility restriction is to be updated.
  A provided value must be able to be parsed as an LDAP distinguished name as described in RFC 4514.
  
  
• -S {state} / --state {state} — The accessibility state to use for the accessibility restriction on the target subtree. Allowed values: accessible, read-only-bind-allowed, read-only-bind-denied, hidden.
  A provided value should be one of the following: 'accessible', 'read-only-bind-allowed', 'hidden', 'read-only-bind-denied'.
  
  
• -B {dn} / --bypassUserDN {dn} — The DN of a user who is allowed to bypass restrictions on the target subtree.
  A provided value must be able to be parsed as an LDAP distinguished name as described in RFC 4514.
  
  
• --interactive — Launch the tool in interactive mode.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --outputFile {path} — Write all standard output and standard error messages to the specified file instead of to the console.
  The specified path must refer to a file which may or may not exist, but whose parent directory must exist.
  
  
• --appendToOutputFile — Indicates that the tool should append to the file specified by the --outputFile argument if it already exists. If this argument is not provided and the output file already exists, it will be overwritten.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --teeOutput — Write all standard output and standard error messages to the console as well as to the specified output file. The --outputFile argument must also be provided.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• -H / --help — Display usage information for this program.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --help-debug — Display usage information for debug logging.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --enable-debug-logging — Enables debug logging for the tool.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --debug-log-level {level} — The debug log level to use for the tool. Allowed values include 'off', 'severe', 'warning', 'info', 'fine', 'finer', and 'finest'. If this is not specified, a default level of 'severe' will be used.
  
  
• --debug-log-category {category} — The message categories to include in the debug log output. Allowed values include 'asn1', 'connect', 'exception', 'ldap', 'connectionpool', 'ldif', 'monitor', 'codingerror', and 'other'. This argument may be provided multiple times to indicate that multiple categories should be included. If this is not specified, then all categories will be included.
  
  
• --include-debug-stack-traces — Indicates that debug log messages should include a stack trace with the code location from which each debug message originated.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --use-multi-line-debug-messages — Indicates that debug log messages (which will be JSON objects) should be written as multi-line strings rather than single-line strings.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --debug-log-file {path} — The path to the debug log file to be written. If this is not specified, a default path of 'subtree-accessibility.debug' will be used.
  The specified path must refer to a file which may or may not exist, but whose parent directory must exist.
  
  
• -V / --version — Display version information for this program.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --propertiesFilePath {path} — The path to a properties file used to specify default values for arguments not supplied on the command line.
  The specified path must refer to a file that exists.
  
  
• --generatePropertiesFile {path} — Write an empty properties file that may be used to specify default values for arguments.
  The specified path must refer to a file which may or may not exist, but whose parent directory must exist.
  
  
• --noPropertiesFile — Do not obtain any argument values from a properties file.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  
• --suppressPropertiesFileComment — Suppress output listing the arguments obtained from a properties file.
  This argument is not allowed to have a value. If this argument is included in a set of arguments, then it will be assumed to have a value of 'true'. If it is absent from a set of arguments, then it will be assumed to have a value of 'false'.
  
  

Dependent Argument Sets

• If the --keyStorePassword argument is provided, then the --keyStorePath argument must also be provided.
• If the --keyStorePasswordFile argument is provided, then the --keyStorePath argument must also be provided.
• If the --promptForKeyStorePassword argument is provided, then the --keyStorePath argument must also be provided.
• If the --trustStorePassword argument is provided, then the --trustStorePath argument must also be provided.
• If the --trustStorePasswordFile argument is provided, then the --trustStorePath argument must also be provided.
• If the --promptForTrustStorePassword argument is provided, then the --trustStorePath argument must also be provided.
• If the --keyStorePath argument is provided, then at least one of the following arguments must also be provided: --useSSL, --useStartTLS
• If the --trustStorePath argument is provided, then at least one of the following arguments must also be provided: --useSSL, --useStartTLS
• If the --defaultTrust argument is provided, then at least one of the following arguments must also be provided: --useSSL, --useStartTLS
• If the --trustAll argument is provided, then at least one of the following arguments must also be provided: --useSSL, --useStartTLS
• If the --bindPassword argument is provided, then at least one of the following arguments must also be provided: --bindDN, --saslOption
• If the --bindPasswordFile argument is provided, then at least one of the following arguments must also be provided: --bindDN, --saslOption
• If the --promptForBindPassword argument is provided, then at least one of the following arguments must also be provided: --bindDN, --saslOption
• If the --baseDN argument is provided, then the --set argument must also be provided.
• If the --state argument is provided, then the --set argument must also be provided.
• If the --bypassUserDN argument is provided, then the --set argument must also be provided.
• If the --set argument is provided, then the --baseDN argument must also be provided.
• If the --set argument is provided, then the --state argument must also be provided.
• If the --appendToOutputFile argument is provided, then the --outputFile argument must also be provided.
• If the --teeOutput argument is provided, then the --outputFile argument must also be provided.

Exclusive Argument Sets

• The following arguments cannot be used together: --useSSL, --useStartTLS
• The following arguments cannot be used together: --keyStorePassword, --keyStorePasswordFile, --promptForKeyStorePassword
• The following arguments cannot be used together: --trustStorePassword, --trustStorePasswordFile, --promptForTrustStorePassword
• The following arguments cannot be used together: --defaultTrust, --trustAll
• The following arguments cannot be used together: --trustAll, --trustStorePath
• The following arguments cannot be used together: --bindDN, --saslOption, --useSASLExternal
• The following arguments cannot be used together: --bindPassword, --bindPasswordFile, --promptForBindPassword
• The following arguments cannot be used together: --propertiesFilePath, --noPropertiesFile

Examples

• Retrieve information about all subtree accessibility restrictions defined in the server.

    subtree-accessibility --hostname server.example.com --port 389 \
         --bindDN uid=admin,dc=example,dc=com --bindPassword password

• Create or update the subtree accessibility state definition for subtree 'ou=subtree,dc=example,dc=com' so that it is read-only for all users except 'uid=bypass,dc=example,dc=com'.

    subtree-accessibility --hostname server.example.com --port 389 \
         --bindDN uid=admin,dc=example,dc=com --bindPassword password --set \
         --baseDN ou=subtree,dc=example,dc=com \
         --state read-only-bind-allowed \
         --bypassUserDN uid=bypass,dc=example,dc=com